Standard Display Screen

(a)

Installed version of the Read-Out Software

(b)

<Settings> menu: Here, you can switch between the units of measurement °C and °F (for the measured values for temperature) and between bar and psi (for the measured values for pressure).

(c)

<Select Language> menu to change the language

(d)

The <File> menu contains the following submenus:

  • <Report> to create a report over several work cycles (<Multi-Cycle Report>),
  • <Export as CSV> to export a report as a CSV file,
  • <Close> to exit the software.

(e)

After starting the software, the <Tool Status> tab is displayed with the illustration of the compatible power tools and the status overview (h).

(f)

In the <Cycle Data> tab, you can find information about the individual work cycles see Work Cycle Data.

(g)

In the <Tool Records> tab, you can create and save comments see Comment Function.

(h)

You can find the following information in the status overview at any time, regardless of the tab selected:

  • <Serial Number>: Serial number of the connected power tool
  • <Total Running Time>: Total number of operating hours of the connected power tool
  • <Total Cycle Count>: Total number of previous work cycles of the connected power tool
  • <Name>: Product designation of the connected power tool
  • <Cycles Before Service>: Number of work cycles still remaining until the next maintenance (every 20000 work cycles)
  • <Date>: Current date and time
  • <Firmware Version>: Version of the operating software of the connected power tool

(i)

You can see the status of the connection to the power tool from the colour of the connection indicator (i) see Connecting the Power Tool to the PC.