Selecting the working mode
The AUTO (18) button can be used to choose between two working modes.
- AUTO ON working mode:
To set a blind rivet, press the on/off switch (12) briefly and then release it again. The riveting process is automatically completed.
Advantage: Convenient riveting - AUTO OFF working mode:
To set a blind rivet, press and hold the on/off switch (12) until the blind rivet is fully set and the rivet mandrel has broken off. Then release the on/off switch in order to complete the riveting process
Advantage: Quick riveting (depending on the blind rivet/nosepiece combination that is used)
