Technical Data
Wall chaser |
| GNF18V-40 |
|---|---|---|
Article number | 3 601 FC5 0.. | |
Rated voltage | V= | 18 |
Rated no-load speedA) | min−1 | 4700 |
Max. diamond cutting disc diameter | mm | 150 |
Working with a diamond cutting disc | ||
| mm | 2.0 |
| mm | 2.5 |
Working with two diamond cutting discs | ||
| mm | 2 × 2.0 |
| mm | 2 × 2.5 |
Locating bore | mm | 22.23 |
Spindle thread | M14 | |
Cutting depthB) | mm | 10–40 |
Groove widthC) | mm | 2–39 |
WeightD) | kg | 4.2 |
Run-out brake | ● | |
Soft start | ● | |
Restart protection | ● | |
Recommended ambient temperature during charging | °C | 0 to +35 |
Permitted ambient temperature during operationE) and during storage | °C | –20 to +50 |
Compatible rechargeable batteries | GBA18V… | |
Recommended rechargeable batteries for maximum performance | EXPERT18V... ≥ 8.0 Ah | |
Recommended battery chargers | GAL18... | |
- A)
Rated no-load speed for the selection of appropriate application tools in accordance with IEC 62841-2-22. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
Depending on disc type and wear. The maximum cutting depth is achieved using a new diamond cutting disc with a diameter of 150 mm.
- C)
depending on the thickness of the diamond cutting discs
- D)
with mounting flange (22), spacer discs (24), clamping nut (25) and without battery (you can find the battery weight on www.bosch-professional.com)
- E)
Limited performance at temperatures < 0 °C
Technical data determined with rechargeable battery EXPERT18V 15.0Ah.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.