Fitting/Removing the Hose

Use a commercially available compressed-air hose. Check the compressed-air hose and its connections for damage before use.

Insert the compressed-air hose into the quick coupling of the hose connection (9) so that it clicks into place.

Only connect compressed-air tools or compressed-air accessories to the compressed-air hose that are suitable for the pressure and flow rate of the compressor.

Allow the compressor and compressed-air hose to cool down before removing the compressed-air hose. The compressor and compressed-air hose can become hot when used for prolonged periods of time.

Hold the end of the hose firmly when removing the compressed-air hose. A pressurised hose can flail around uncontrollably.

Before removing the compressed-air hose, turn the working pressure regulator knob (2) anticlockwise as far as it will go.

To remove it, pull back the sleeve of the hose connection (9) and pull the compressed-air hose out of the hose connection.