Technical Data
Angle grinder | GWS 27-180 PR | GWS 27-230 PR | GWS 27-180 JR | GWS 27-230 JR | |
|---|---|---|---|---|---|
Article number | 3 601 HC6 1.. | 3 601 HC7 1.. | 3 601 HC6 3.. | 3 601 HC7 3.. | |
Rated power input | W | 2700 | 2700 | 2700 | 2700 |
Rated no-load speedA) | min-1 | 8500 | 6500 | 8500 | 6500 |
Max. grinding disc diameter | mm | 180 | 230 | 180 | 230 |
Grinding spindle thread | M 14 | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 25 | 25 | 25 | 25 |
Soft start | ● | ● | ● | ● | |
Restart protection | ● | ● | ● | ● | |
Kickback stop | ● | ● | ● | ● | |
Rotatable auxiliary handle | ● | ● | ● | ● | |
PROtection switch | ● | ● | – | – | |
WeightB) | kg | 6.2 | 6.3 | 6.2 | 6.3 |
Protection class |
|
|
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
With protective guard (33), auxiliary handle (31), mounting flange (10) and clamping nut (14), without mains connection cable
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.