Technical Data
Angle grinder | GWS 20-125 SB | GWS 20-125 TSB | |
|---|---|---|---|
Article number | 3 601 GD5 0.. | 3 601 GD5 2.. | |
Rated power input | W | 2000 | 2000 |
Power output | W | 1400 | 1400 |
Rated no-load speedA) | min-1 | 10500 | 9700 |
Speed adjustment range | min-1 | 2800–10500 | 2400–9700 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 125 | 125 |
Grinding spindle thread | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 21 | 21 |
Speed preselection | ● | ● | |
Constant electronic control | ● | ● | |
Overload protection | ● | ● | |
Restart protection | ● | ● | |
Soft start | ● | ● | |
Kickback stop | ● | ● | |
Run-out brake | ● | ● | |
Drop control | ● | ● | |
Status indicator (LED) | ● | ● | |
WeightB) | kg | 2.5 | 2.5 |
Protection class |
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
With protective guard (10), auxiliary handle (8), mounting flange (33) and clamping nut (19), without mains connection cable
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.