Technical Data
Angle grinder | GWS 18V-11 | GWS 18V-11 | GWS 18V-11 S | GWS 18V-11 S | |
|---|---|---|---|---|---|
Article number | 3 601 JN4 1.. | 3 601 JN4 1.. | 3 601 JN4 0.. | 3 601 JN4 0.. | |
Rated voltage | V= | 18 | 18 | 18 | 18 |
Rated no-load speedA) B) | min-1 | 9000 | 9000 | 9000 | 9000 |
Speed adjustment range | min-1 | – | – | 3000–9000 | 3000–9000 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 115 | 125 | 115 | 125 |
Grinding spindle thread | M 14 | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 | 22 | 22 |
Kickback stop | ● | ● | ● | ● | |
Restart protection | ● | ● | ● | ● | |
Run-out brake | ● | ● | ● | ● | |
Drop control | ● | ● | ● | ● | |
Speed preselection | – | – | ● | ● | |
WeightC) | kg | 1.8 | 1.8 | 1.8 | 1.8 |
Recommended ambient temperature during charging | °C | 0 to +35 | 0 to +35 | 0 to +35 | 0 to +35 |
Permitted ambient temperature during operationD) and during storage | °C | –20 to +50 | –20 to +50 | –20 to +50 | –20 to +50 |
Compatible rechargeable batteries | GBA18V... | GBA18V... | GBA18V... | GBA18V... | |
Recommended rechargeable batteries for maximum performance | GBA 18V... | GBA 18V... | GBA 18V... | GBA 18V... | |
Recommended battery chargers | GAL18... | GAL18... | GAL18... | GAL18... |
- A)
Measured at 20–25 °C with rechargeable battery ProCORE18V 12.0Ah
- B)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed is lower for safety reasons and according to production tolerances.
- C)
With protective guard (10), auxiliary handle (8), mounting flange (13) and clamping nut (19), without battery (you can find the battery weight at www.bosch-professional.com)
- D)
Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.