Technical Data
|
Angle grinder |
GWS 1400 C |
GWS 1400 |
GWS 14-125 | |
|---|---|---|---|---|
|
Article number |
3 601 H24 2.. |
3 601 H24 8.. |
3 601 H24 8.. | |
Rated power input | W | 1400 | 1400 | 1400 |
Power output | W | 820 | 820 | 820 |
Rated no-load speedA) | min-1 | 11800 | 11800 | 11800 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 125 | 125 | 125 |
Grinding spindle thread | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 22 | 22 | 22 |
Restart protection | ● | ● | ● | |
Soft start | ● | ● | ● | |
Constant electronic control | ● | ● | ● | |
WeightB) | kg | 2.1 | 2.1 | 2.1 |
Protection class |
|
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
With protective guard (7), auxiliary handle (5), mounting flange (10) and clamping nut (17), without mains connection cable
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.