Storage and transport
Storing Tool Elements (see figure Q)
You can attach certain tool elements to the power tool to store them.
- Place all loose tool elements in their brackets on the housing (see the table below).
Tool element | Storage |
|---|---|
Protective cover (3) | Bracket (10); tighten with clamping lever (40) |
Angle guide (1) | Holder (33) |
Dust extraction adapter (34) | see figure Q |
Ring spanner (23) | see figure Q |
Hex key (9) | see figure Q |
Push stick (7) | Hook into the bracket between the parallel guide (27) and the additional parallel guide (8) |
Parallel guide (27) | Turn around, position from below into the guide rail (26) using the pin pair (43) and secure the locking levers (42) |
Transporting the Power Tool (see figure R)
Before transporting the power tool, the following steps must be carried out:
- Bring the power tool into the transport position see Transport position.
- Remove all accessories that cannot be securely fitted to the power tool.
If possible, transport unused saw blades in an enclosed container. - Slide the guide rail (26) all the way in and press the clamping handle (25) down to fix it in place.
- Wrap the power cable around the cable holder (32).
- Use the carrying handle (66) or the recessed handles (67) to lift or transport the tool. Do not use the positioning handles (11) for this purpose.
- Only use the transport devices to transport the power tool and never the protective devices.