Start-up

Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the power tool.

Products that are only sold in AUS and NZ: Use a residual current device (RCD) with a nominal residual current of 30 mA or less.

Fold up the safety flap (15).
To start, press the green "on" button (14).
Drop the safety flap (15) back down.

Press the off switch (16).

To protect against unauthorised use, you can lock the safety flap (15) with a padlock.

Push a padlock through the bore holes of the safety flap (15) and the off switch (16) and lock it.