Stationary or flexible mounting

To ensure safe handling, the power tool must be mounted on a flat, stable work surface (e.g. work bench) before use.

Assembly on a Work Surface (see figure f)

Use a suitable screwed connection to secure the power tool to the work surface. The holes (12) are used for this purpose.

or

Firmly clamp the base of the power tool to the work surface with commercially available screw clamps.

Mounting on a Bosch saw stand (see figure g)

The saw stands by Bosch (e.g. GTA 571) can be easily transported and quickly set up thanks to their foldable design. The power tool can be installed without tools.

Read all the warnings and instructions included with the saw stand. Failure to observe the warnings and follow instructions may result in electric shock, fire and/or serious injury.

Assemble the saw stand properly before mounting the power tool. Correct assembly is important to prevent the risk of collapsing.

Mount the power tool on the saw stand in the transport position.

Use the positioning handles (11) to align the power tool on the saw stand.