Adjusting the Parallel Guide (see figure D)

The parallel guide (27) can be positioned at fixed points on either the left or the right of the saw blade. The three pairs of pins (43), (44), (45) are used for this purpose.

• Position the parallel guide (27) on the required side of the saw blade  see Fitting the Parallel Guide (see figure d).
• Use the rotary knob (24) to set the required spacing between the parallel guide and the saw blade.

The right-hand edge of the spacing indicator (59) displays the set spacing.
For position (43), (45), the lower black scale (13) applies.
For position (44), the upper, silver scale (13) applies.