Stationary or flexible mounting

  • Use a suitable screwed connection to secure the power tool to the work surface. Use the holes (12) to do this.

With the height-adjustable legs, Bosch GTA saw stands provide firm support for the power tool on any surface. The workpiece supports of the saw stand are used for underlaying long workpieces.

  • Read all the warnings and instructions included with the saw stand. Failure to observe the warnings and follow instructions may result in electric shock, fire and/or serious injury.
  • Assemble the saw stand properly before mounting the power tool. Correct assembly is important to prevent the risk of collapsing.
  • Bring the power tool into the transport position.
  • Fit the corresponding adapters to the saw table (13) from underneath.
    Refer to the detailed installation instructions of the adapters.
  • Screw the adapters with the holders of the workbench.

If, in exceptional circumstances, it is not possible to securely mount the power tool on a work surface, you can improvise by placing the feet of the saw table (13) on an appropriate base (e.g. workbench, flat ground, etc.), without screwing down the power tool.