Status indicators

Colour of the status indicator (7)

Meaning

Corrective measure

After Inserting the Battery/Waking the Tool up from Sleep Mode:

Green (3 s)

Power tool ready for use

−

Yellow (3 s)

There are fewer than 1000 work cycles remaining until the end of the maintenance interval.

Schedule maintenance with an authorised Bosch after-sales service centre.

Red (3 s)

Battery is too weak for pressing process

Charge/change battery

Battery and/or power tool outside the operating temperature range

Allow the battery and the power tool to reach the correct temperature range

After Completion of the Pressing Process/During Operation:

Green (3 s)

Pressing force target value reached, labour value OK

−

Yellow (continuous)

Maintenance interval of 20,000 work cycles exceeded

Send the power tool to an authorised Bosch after-sales service centre for maintenance.

Red (3 s)

Pressing force not reached, internal power tool error or power tool outside the operating temperature range

  1. Restart the pressing process
  2. Remove and reinsert the battery
  3. Allow the power tool to reach the correct temperature range
  4. If these measures do not help, contact an authorised Bosch after-sales service centre.

The specific error messages can also be accessed via the Bosch Read-Out Software.