User Interface
The user interface (12) is used to select the working mode and to indicate the status of the power tool.
Status indications
Power tool status indicator (13) | Meaning | Solution |
|---|---|---|
– | Power tool switched off | – |
Green | Power tool switched on and ready to use | – |
Yellow | Critical temperature has been reached or rechargeable battery is almost empty | Run the power tool at no load and allow it to cool down, or replace or charge the battery soon |
Red | Power tool has overheated or rechargeable battery is empty | Allow the power tool to cool down, or replace or charge the battery |
Battery is too weak | Charge the battery or use the recommended battery type | |
General error |
If the error persists:
|
Battery charge indicator (user interface) (18) | Meaning/cause | Solution |
|---|---|---|
Green (2 to 5 bars) | Battery charged | – |
Yellow (1 bar) | Battery almost empty | Replace or charge battery soon |
Red (1 bar) | Battery empty | Replace or charge battery |
Temperature indicator (14) | Meaning/cause | Solution |
|---|---|---|
Yellow | Operating temperature of the battery or the power tool has significantly increased, performance is reduced | Leave the power tool to cool down or replace overheated battery |
Red | Operating temperature of the battery or the power tool has been exceeded, power tool switches itself off as a precautionary measure | Leave the power tool to cool down or replace overheated battery |
Selecting the working mode
Press the (16) button for selecting the working mode repeatedly until the working mode you require lights up.
Functions | |
|---|---|
Indicator for 100 % working mode (15) | 100 % working mode (Adaptive Speed Control soft start): |
Indicator for 70 % working mode (17) | 70 % Working mode (Adaptive Speed Control soft start): |